Dubuis Hydraulic crimping tools, cable cutters, Hydraulic pumps
D36 Hydraulic Crimp Tool
The D36 is designed to crimp 4mm2 through 150mm2, the head rotates through 180 degrees.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 35kN | 8mm | 215x50x175mm | 1.360KG |
Associated Die Sets for D36 Hydraulic Crimp Tool
D36 Electric Hydraulic Crimp Tool
Electro-hydraulic lightweight crimping tool for connectors 4mm2 through 150mm2. Tool supplied with carrying case and I hour charger. Accepts all die sets as used with the D36.
| Force | Battery | Stroke | Dimension | Weight |
|---|---|---|---|---|
| 35kN | 12V - 2.2Ah | 8mm | 285x80x230 | 2.7KG |
Associated Die Sets for D36 Electric Hydraulic Crimp Tool
D62 Hydraulic Crimp Tool
The D62 is designed to crimp 6mm2 through 240mm2, this tool has a 2 stage hydraulic system, which reduces the number of crimp cycles.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 62kN | 13mm | 420x53x150mm | 2.850KG |
Associated Die Sets for use with D62 Hydraulic Crimp Tool
D62 Electric Hydraulic Crimp Tool
Electro-hydraulic crimping tool for connectors 6mm2 through 240mm2. Designed for single hand operation this tool has excellent balance. Two-stage system for quick take up with electronic speed control, light indicator providing power load, crimping cycle completion and maintenance indication. Accepts same dies as D62. These dies may also be used in tools type D80 and C130.
| Force | Battery | Stroke | Dimension | Weight |
|---|---|---|---|---|
| 62kN | 14.4v-3.0Ah | 13mm | 365x313x95 | 5.40KG |
Associated Die Sets for use with D62 Electric Hydraulic Crimp Tool
XD62 Hydraulic Head
The XD62 accepts the same dies as the D62. With quick opening latch head this tool should be connected to a hydraulic system operating at 700bar.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 62kN | 13mm | 195x53x100 | 2.20KG |
Associated Die Sets for use with XD62 Hydraulic Head
D51 Hydraulic Crimp Tool
Manual lightweight hydraulic crimping tool for crimping 4mm2 through 185mm2. Quick opening and closing of the latch head. Also available with two stage piston for rapid advance of piston type D52.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 55kN | 13mm | 365x53x130mm | 2.50KG |
Associated Die Sets for use with D51 Hydraulic Crimp Tool
XD51 Hydraulic Head
The XD51 accepts the same dies as the D51. With quick opening latch head this tool should be connected to a hydraulic system operating at 700bar.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 55kN | 13mm | 180x53x74 | 1.750KG |
Associated Die Sets for use with XD51 Hydraulic Head
D55 Electric Hydraulic Crimp Tool
Electro - hydraulic lightweight crimping tool for connectors 4mm2 through 185mm2. Tool supplied with carrying case and 1-hour charger. Accepts all dies as used with D51. Also available with 14,4v x 3.0Ah battery.
| Force | Battery | Stroke | Dimension | Weight |
|---|---|---|---|---|
| 55kN | 12v-2.2Ah / 14.4v - 3.0Ah |
13mm | 315x80x235 | 3.24KG |
Associated Die Sets for use with D55 Electric Hydraulic Crimp Tool
C130 Hydraulic Crimp Tool
The C130 is designed to crimp 10mm2 through 400mm2, this tool has a 2 stage hydraulic system, which reduces the number of crimp cycles.| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 130kN | 26mm | 545x70x160mm | 5.360KG |
Associated Die Sets for use with C130 Hydraulic Crimp Tool
C130 Electric Hydraulic Crimp Tool
Electro-hydraulic crimping tool for connectors 10mm2 through 400mm2. Designed for single hand operation this tool has excellent balance. Two-stage system for quick take up with electronic speed control, light indicator providing power load, crimping cycle completion and maintenance indication. Accepts same dies as C130.
| Force | Battery | Stroke | Dimension | Weight |
|---|---|---|---|---|
| 130kN | 14.4v-3.0Ah | 26mm | 385x30x95 | 6.84KG |
Associated Die Sets for use with C130 Electric Hydraulic Crimp Tool
XC130 Hydraulic Head
The XC130 accepts same dies as C130 and D62. Open throat from 26-38mm available. Quick installation of dies using spring loaded retention system. Should be connected to a hydraulic system operating at 700bar.
| Force | Stroke | Dimension | Weight |
|---|---|---|---|
| 130kN | 26mm | 195x70x125 | 3.90KG |
Associated Die Sets for use with XC130 Hydraulic Head
About Us Documentation Site Map Use of Cookies Website Terms and Conditions
Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park Mansfield, Notts NG18 5BY Tel: +44 1623 638100 Fax: +44 1623 638111 email: sales@glenair.co.uk or Webmaster
VAT Registration No 118 4718 64
Copyright © 2009-2012 Glenair UK Ltd. All Rights Reserved